Software Based Electrical Estimating Services With Professional

Electrical contractor pricing climbed 1.7% between October 2025 and February 2026, per BLS data. That swing erodes thin bid margins fast. Our Conest software based electrical estimating services sync live pricing and NEC-based assemblies in one connected stack, so every number stays accurate. Send your plans today.

Strict 2026 NEC compliance

Licensed across 45+ states

98% accurate cost projections

Revision And Update Support

20+ Years in Business

Electrical Estimates Built Around Real NEC Compliance

Electrical estimating software inside our stack draws from the largest industry-smart database, over 140,000 NEC-based items and 500,000 pre-built assemblies, so pricing logic stays consistent no matter which estimator runs the job.

Every Fixture Counted Through Sure Count Digital Takeoff

Bid bonds and performance bonds punish a missed conduit run fast, and permit reviewers flag gaps between drawings and submitted counts just as quickly. Patented Auto-Count measures identical symbols across sheets while point-and-click tools handle linear runs, keeping every category tied to the actual drawing set.

One Software Environment, From Takeoff to Bid File

Premises and cloud-based software solutions keep quantities, pricing, and labor data linked inside one Conest ecosystem, so nothing gets converted, re-typed, or lost between steps. ItemVue tracks every takeoff timestamp and note, giving contractors a clean audit trail behind each priced line before submission.

Stop Losing Hours to Disconnected Spreadsheets

Our Conest software system based electrical estimating services run on one linked software stack, current NEC assemblies, and live supplier pricing that holds up under scrutiny. Upload your plan set now and get a defensible, editable estimate file back fast.

Who Relies on This Software-Driven Estimating Process

Electrical Project Types Priced Inside the Software

Electrical estimating, takeoff, and reporting software solutions apply the same coded database across every scope, yet labor factoring and assembly logic shift by project type. Height, run length, and installation conditions all feed into the pricing engine, so numbers match real field conditions, not flat averages.

Send Your Drawings for Complete, Conest-Ready Electrical Estimates

Manual counts leave too many database fields blank before bid day. Design and Bids team runs every Conest software system-based electrical estimating services file through the same connected software stack and current code library, so estimates survive review. Share your drawings and receive a submission-ready file fast.

New Construction

Full assemblies price from service entrance to final device inside IntelliBid. Seismic zones like California pull bracing and anchorage line items straight from ASCE 7 assembly rules.

Service Upgrades & Panel Swaps

Local code amendments load into the database as regional overrides. Chicago jobs, for instance, price rigid conduit assemblies instead of standard EMT line items.

Solar & Renewable Energy

Inverter, rapid-shutdown, and interconnection line items price against solar-specific assemblies, with marine-grade hardware swapped in automatically for coastal, corrosion-prone job sites.

Renovation & Tenant Improvement

Auto-Labor Factoring adjusts hours for cramped, existing spaces. Estimators source current material costs through EPIC whenever old circuits no longer meet NEC panel rules.

Low Voltage & Datacom

Structured cabling and rack counts run through the TRA-SER feed on separate assemblies, keeping pathway and cable-length math apart from general power scope entirely.

Emergency & Life Safety

Generators, transfer switches, and egress lighting price as separate assemblies from normal power, keeping NFPA 72 and NFPA 101 branch loads distinct for fire marshal review.

Why One Connected Stack Beats a Patchwork of Tools

Juggling separate spreadsheets and pricing sheets invites transcription errors on every single bid. A connected environment keeps takeoff, pricing, and reporting inside one automated workflow chain, so numbers stay traceable from the first click to the final file handed back to a contractor.

Native File Compatibility

Delivers .mdb or native Conest project files, retaining all IntelliBid assembly hierarchies, phase structures, and database keys so your local workstation imports them seamlessly without data loss.

Multi-Format Takeoff Input

Ingests vector PDF, DWG, and DXF files directly into SureCount, mapping layers and scaling coordinates precisely to eliminate manual measurement errors before quantities populate your database items.

Server-Grade Reliability

Operates on robust SQL Server backend architecture, supporting concurrent multi-user database access, item syncing, and centralized assembly management across all active estimating workstations on your network.

Auto-Labor Factoring

Applies pre-programmed Conest labor difficulty multipliers, automatically adjusting man-hours for installation height, run length, scaffolding, and multiple conduit pulls per specific site conditions.

Code-Linked Assemblies

Ties every individual material line item directly to specific 2026 NEC articles within IntelliBid, ensuring compliance standards match local code requirements without manual cross-referencing.

Auditable Takeoff Trail

Embeds ItemVue timestamps, user notes, and drawing coordinates directly into every counted item, providing a transparent audit trail behind every calculated quantity and labor unit.

Specialty Subcontractors

Smaller trade contractors bidding several jobs weekly need fast, database-driven numbers without hiring a full-time estimator or licensing their own software seat.

Design-Build Teams

Teams working design-assist need IntelliBid electrical estimating that adjusts pricing as drawings develop, without restarting takeoff after every design revision lands.

Solar Installers

Solar firms need interconnection and battery pricing tied to current equipment costs, synced automatically instead of pulled from a stale supplier catalog.

Built for Every Bidder on the Job

Firms of every size need numbers that hold up once submitted, not once revised twice. Conest software system based electrical estimating services fit contractors bidding public and private work, from single-trade shops to large multi-state teams handling complex commercial and industrial scopes.

General Contractors

GCs assembling full project budgets need electrical numbers from a source that will not shift scope mid-project, protecting overall accuracy across every trade package.

Property Developers

Developers planning new builds need dependable early numbers pulled from live assemblies to secure financing and compare bids from competing contractors fairly.

Public Sector Bidders

Government contractors need documented, auditable estimates that meet procurement and prevailing wage requirements.

What Contractors Say About the Software Behind Their Bids

Contractors trust this stack with numbers that decide whether a bid gets won or lost. Here is what real clients say about accuracy and everyday communication on tight deadlines.

Sarah John

Electrical Contractor

Our old estimates never factored labor properly. The takeoffs provided by this team adjust for run length and height automatically, and our bids finally match what installation actually takes.

Nama Z.

Low-Voltage Contractor

Material pricing kept slipping through the cracks between bid day and award for months. This team synced our numbers so margin did not erode before the job even started.

Adam Thompson

Chief Estimator

Getting the estimate back as an editable file changed our workflow completely. We reopen it for every change order instead of rebuilding quantities from a static PDF.

Upload Plans

How We Build Every Conest Software Based Electrical Estimating Services File

Digital Takeoff

Every conduit run, device, fixture, and cable length gets counted directly from drawings, with verified quantities exported straight into the pricing engine without manual re-entry.

Assembly Pricing & Labor Factoring

Quantities get priced against NEC-based assemblies, then Auto-Labor Factoring adjusts hours for installation height, run length, and multiple runs per actual site conditions.

Pricing Sync & Reporting

Material costs sync through NetPricer for current supplier data, while the reporting layer breaks the estimate into phases, alternates, and change-order-ready summaries.

What You Actually Receive in an Electrical Estimate File

An estimate file is not a single lump-sum number pulled from a spreadsheet. It breaks into structured components an in-house estimator would produce, just faster and fully cross-checked against code.

Item & Assembly Database Detail

Every conduit, fixture, and device is itemized by type, size, and count from the coded assembly database, with quantities processed through Conest Connect analytics and reporting.

Labor Unit Tables

Man-hours get calculated per assembly and difficulty level, showing exactly where crew time goes across rough-in, trim, testing, and final connection phases on every job.

Live Pricing Detail

Pricing reflects live supplier data synced automatically at delivery time, not outdated catalog rates that leave contractors underbidding real material costs on the project.

Phase Breakdown

Numbers are grouped by floor and system through a cloud-based reporting platform, simplifying progress billing, closeout, and payment requests.

Software and Pricing Platforms We Run

Frequently Asked Questions

What makes Conest-based estimating different from generic takeoff work?

It runs on a coded database of pre-built items and assemblies. Pricing stays consistent across electrical, low-voltage, and datacom scopes.

Which parts of the software handle takeoff versus pricing?

One tool counts quantities from drawings. A separate engine prices those counts against NEC-based assemblies and adjusts labor for site conditions.

How does the software keep material pricing current?

Live feeds sync supplier costs into the database automatically. Labor hours then adjust for installation height and run-length multipliers built into the pricing engine.

Can I reopen and revise the file myself later?

Yes. Estimates deliver as native, editable project files. Change orders and phase revisions get made inside the same file, without re-keying quantities from scratch.

Do you handle both counting and pricing, or just one step?

Both steps happen in-house across separate connected programs. You receive one coordinated file instead of managing two disconnected software steps on your own.